As the replacement product of electric light source, led flood light has been recognized by more and more people, and has been applied in many fields. But do you know Its main features?

Led flood light features as follows:

  1. Long life: Ordinary incandescent lamps, fluorescent lamps, energy-saving lamps and other gas discharge lamps have filament or electrode, and the sputtering effect of filament or electrode is just an inevitable component to limit the service life of the lamp.High frequency discharge lamps require little or no maintenance and have high reliability.Service life up to 60,000 hours (10 hours per day for more than 10 years).

Led food light Compared with other lights:

60 times as much as incandescent lamps;That’s 12 times more than CFLS;That’s 12 times the size of a fluorescent lamp;20 times as high pressure mercury lamps;The long life of the floodlight greatly reduces the trouble of maintenance and replacement times, Save material cost and labor cost, and ensure the long-term normal use.Since floodlights have no electrodes, they emit light by combining the principle of electromagnetic induction with the principle of fluorescent discharge. So there are no necessary components that limit life.The service life only depends on the quality grade of electronic components, circuit design and bubble body manufacturing process, the general service life can reach 60,000 ~ 100,000 hours.

  1. Energy saving: Compared with incandescent lamps, the energy saving is about 75%. The luminous flux of 85W floodlight is about the same as that of 500W incandescent lamp.

3.environmental protection: it uses solid mercury agent, even if broken will not cause pollution to the environment, has more than 99% of the recycling rate, is the real environmental protection green light.

  1. No stroboscopic effects: due to its high working frequency, it is deemed as “no stroboscopic effects at all”, which will not cause eye fatigue and protect eye health.
  1. Good color rendering: the color rendering index is greater than 80, and the light color is soft, presenting the natural color of the object being illuminated.

6.color temperature optional: from 2700K to 6500K according to customer’s needs, and can be made into color bulbs, used for garden decoration lighting.

  1. High visible light ratio: in the emitted light, visible light ratio reaches more than 80%, with good visual effect.
  2. No preheating.It can be started and restarted immediately. Multiple switches will not have the light fading phenomenon in ordinary discharge lamps with electrodes.
  3. Excellent electrical performance: high power factor, low current harmonic, constant voltage power supply, output constant luminous flux.
  4. Adaptability of installation: it can be installed in any direction without restriction.The surface temperature reaches 30-40 degrees, which can improve the service life of LED lamps.

Led flood light application

Led Flood lights, which illuminate objects uniformly in all directions from a particular point, are best used to simulate light bulbs and candles.

Main application: billboard, highway, railway tunnel, bridge and culvert, square, building, etc

Led Flood light is a kind of “point light source” that can illuminate uniformly in all directions, its irradiation range can be adjusted arbitrarily, can produce shadow on the object.

Omni is one of the most widely used lighting sources in renderings. The “standard omni” is used to illuminate an entire scene, with no specific scope.

Multiple flood lights can be used in the scene to create a better effect.It’s important to note that you can’t create too many omni’s or the renderings will look flat and dull.

Therefore, it is necessary to pay more attention to the influence of lighting parameters and layout on the light sense of the whole scene in the renderings, accumulate more experience, and master the lighting collocation skills.

Where can you Use led flood light?

Hotel exterior wall, square night view, garden lighting, interior decoration, outdoor floodlight

LED flood light features

What is LED flood light? It is mainly used for architectural decorative lighting and commercial space lighting. The decorative components are heavy. Its appearance has circle also has square, because general must consider the reason that come loose heat, because its appearance and traditional cast light lamp still have a few distinction.

LED flood lights are actually made up of LED cups.He has some characteristics of his own, see below:

  1. High purity aluminum reflector, the most accurate beam and the best reflection effect.
  2. Symmetric narrow Angle, wide Angle and asymmetric light distribution system.
  3. Switch the bulb on at the back, easy to maintain.
  4. The lamps are equipped with calibration plates to adjust the irradiation Angle.

LED flood light is controlled by built-in microchip, which can be used without controller in small engineering applications. It can realize dynamic effects such as gradual change, jump change, color flicker, random flicker, gradual alternations and so on. It is also possible to achieve chase, scan and other effects through the control of DMX. Its main application sites may be as follows: single building, external wall lighting of historic buildings, internal and external illumination of buildings, indoor local lighting, green landscape lighting, billboard lighting, Medical culture and other special facilities lighting, bars, dance halls and other entertainment venues atmosphere lighting and so on.