Temporary work lights are installing at a job site for a short period of time, and then removed and installed at another job site after permanent fixtures are installed at the first job site. The most important thing to do is to have a plan when you start any project. A clear design for your temporary lighting is key to ensuring your workspace is properly lit.

LED temporary work light ensuring the safety of your workers and the efficiency of your project. Lighting plans for architectural projects should have a lighting plan, and most lighting plans will be divided into three levels. Primary lighting Lights that indicate areas of work operations, such as where workers will be working or moving. Primary lighting is best for tasks that require less precision, such as where there are large objects. This usually means about five foot-candles of continuous light.

Secondary lighting designates the lighting of areas around construction equipment to provide a safe environment for workers who may operate the equipment with moderate precision. This type of lighting typically allows 10 foot candles of continuous illumination. Finally, tertiary lighting is best for very difficult tasks that require high precision. These lights typically allow 20 foot candles of continuous illumination.

Temporary lighting needs to be installed at the most useful places, and most light fixtures come with software, it can help you determine which lighting scheme is best for your workspace. Once your lighting plan was designed and implemented, the site should be tested. Testing should be conducted through field observations of workspace lighting and by having workers move in and around the spaces where they will be working to ensure their spaces are properly lit. You should also be careful about over-lighting spaces. Too much light in a workspace can create glare, and it can be dangerous.

The temporary led work light are designed with all electrical components in enclosed rooms to better protect workers from accidental injuries. Thanks to a variety of beam spreading options, these lights are able to keep cool while spreading light over a large area.

LED Construction Work light models can also be paired with an adjustable suspension kit or magnetic stand for flexible positioning in smaller workspaces. Portable work lights can be transported and reinstalled, often with long cords that allow free movement around the work area.

Features of led temporary string light

1. Beam angle:360 degrees.
2. With metal cage,better protection on the light source.
3. 5 lights or 10 lights per bunch for option. Suitable to different
demand of distant.
4. Light heads spaced 10 feet/3mts apart, same to traditional
string work light.
5.18 AWG power wire, one series connection can do 900W.
6. Green, energy saving, long and reliable life of 50,000 hours.
7. IP65 waterproof rating, protect the light well in outdoor application.
8. Wide colour availability in degrees Kelvin(K),2700-6700K.
9. Each lamp with metal hook, flexible for easy intallation.
10. Come with metal cage, more safety and durable.
11. Misty PC cover protect eyes better, anti-dazzle design

LED string work lights are also available for applications in a variety of situations and can be customized to fit your projects. LED string light sockets are 10 feet apart and all sockets, plugs and connection wires are molded for added durability. In addition, the high-impact material is easy to transport and store when not in use.

LED temporary lighting installations can also be used for events such as concerts and festivals. These types of lights are necessary to ensure maximum safety and security for these activities. Since concerts and festivals are often plugged in and disconnected more frequently, these temporary luminaires are often also fitted with a temporary power distribution system to protect people from electric shock.

Why LED corn work Lights  are more effective

LED corn work light can quickly convert traditional outdoor lighting to energy-efficient LED lighting. These bulb-shaped lamps consist of hundreds of individual LEDs fastened to heat-dissipating elements. They are called corn lights, because the center element is similar to a corn shape.

LED corn bulb is often more than 75% more efficient than metal halide lamps, these lamps are a popular choice for retrofitting current light fixtures. Corn lights are also a good solution for highway lighting, street lighting and sidewalk lighting. They are available in most screw-in sockets and can be easily installed. Make sure the lamp is the right size for the fixture, the corncob bulb is bigger than the old one. Requires a few inches of clearance around it.

A good corn lamp should be able to cool itself because its aluminum construction has a large surface area for heat to dissipate. Corn lamps operating in high temperature environments require proper ventilation. When you shop these lights for your project, make sure to buy lights that are built for the temperatures and conditions you will be operating in.

Using LEDs for your temporary project needs is ideal because these lights use less power, and less power means lower current. This is key for users of temporary site lighting.

Normally, temporary work lights are used in long strings, such as those used during tunnel construction. On these long strings, the voltage loss can be significant due to the resistance. To compensate for this voltage loss, most builders will use heavy duty low resistance cables, it tend to have lower current draw. This lower current consumption will allow the use of lighter gauge cables, which means lower costs for the end user. Another major benefit is that LED lighting allows workers to use longer strings of lights than before.

Less power also means you can run your LEDs at lower voltages, it means higher lumen output for project managers with lower voltage requirements. Incandescent lamps have been available to low voltage users for a long time, but their high power consumption often puts projects at a distinct disadvantage due to low voltage.

High power at low voltage means high current, and high current means high voltage drop over long cable lengths. In the past times, those who used lower voltages had to make up for this by using fewer bulbs or shorter strings than those who could use higher voltage products. Low-voltage users can now opt for a temporary lighting solution in LEDs, which can provide light output and string lengths comparable to high-pressure incandescent lamps.

High power at low voltage creates high current, and high current creates high voltage drop with long cables. In the past, most of peoples used lower voltages had to make up for this by using fewer bulbs or shorter strings than those who could use higher voltage products. Low-voltage users can adopt for a temporary lighting solution by LEDs, which can provide light output and string lengths comparable to high-pressure incandescent lamps.

Lower wattage also means fewer kilowatt-hours will be paid on your bill. For example, a 100-watt incandescent light bulb uses 100 watts, while a typical 100-watt LED light bulb uses only 20 watts. Interestingly, traditional lamp options do not comply with the Restriction of Hazardous Substances Directive because many bulbs are made with hazardous and potentially toxic materials, including mercury. LED lights are generally compliant with this directive, which helps keep your project compliant.

In addition to the energy savings and safety improvements that come with using LED lights on your temporary or construction projects, another benefit is that using these light fixtures can save you tax. It’s becoming increasingly clear that LEDs have a much better impact on the planet than traditional lights, so many states are starting to require standards that may eventually outlaw other high-power lighting. The government is also currently working to phase out incandescent and halogen lamps in the U.S., while individual states are offering tax incentives for residents and businesses switching to LED lights.

On-time delivery, competitive budget, and timely and efficient completion of projects are what all contractors or contractors want, so having a well-lit site is a top priority. Using LED temporary lights for construction, mining, tenant improvement or remodeling is not only a more cost-effective option, but a better way to ensure your workers complete projects in a well-lit, accident-free environment. Utilizing new technology and lower energy sources, these LED lights will prove to be reliable, safe and resilient, no matter the project. There are many advantages to using LED lighting as a temporary site lighting supplier. Keeping up with trends allows your job site to do the job well and get it done safely. As always, we recommend that you work with a lighting specialist for all your lighting needs.